www.breitmeier.de

Technical Data

 

Design features

Modular setup on a granite base plate. Using a 4-D measurement unit both tooth flanks are measured in the tooth gaps in one measurement run. When measuring a spiral gearing the measurement block will be slanted.
The pick up is protected by a suitable housing.

 

Spur gear

Pinion diameter max.	[mm]	160
Range module	[mm]	0.4-8
Range tooth width	[mm]	30
Centre width	[mm]	20-150
Floating fixture
Wheel mass max.	[kg]	30

Internal gear

Wheel diameter max.	[mm]	300
Range module	[M]	0.4-8
Range tooth width	[mm]	30
Fixture in toothed wheel	[mm]	300
Wheel mass max.	[kg]	30

 

Conical gear wheel

Wheel diameter max.	[mm]	300
Range module	[M]	1.5-8
Range tooth height	[mm]	30
Wheel mass max.	[kg]	30

 

Measurement direction: radial. After each profile line the gear is rotated by a suitable angle and also moved vertically.The part is fixed in the hole. The position with respect to roundness, wobble, run out is taken into account when calculating the surface topography.